Table of Contents

 

UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
(Mark One)
☑	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE FISCAL YEAR ENDED DECEMBER 30, 2023
	or
☐	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE TRANSITION PERIOD FROM __________ TO __________

 

Commission file number: 000-18032

 

 

LATTICE SEMICONDUCTOR CORPORATION

(Exact name of registrant as specified in its charter)

 

Delaware	93-0835214
(State of Incorporation)	(I.R.S. Employer Identification Number)
5555 NE Moore Court, Hillsboro, Oregon	97124-6421
(Address of principal executive offices)	(Zip Code)

 

Registrant's telephone number, including area code: (503) 268-8000

________________________________________________________

 

Securities registered pursuant to Section 12(b) of the Act:

 

(Title of Class)	(Trading Symbol)	(Name of each exchange on which registered)
Common Stock, $.01 par value	LSCC	Nasdaq Global Select Market

 

Securities registered pursuant to Section 12(g) of the Act: None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐    No ☑

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐    No ☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☑    No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☑    No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of "large accelerated filer," "accelerated filer," "smaller reporting company," and "emerging growth company" in Rule 12b-2 of the Exchange Act.

Large accelerated filer ☑	Accelerated filer ☐	Non-accelerated filer ☐
Smaller reporting company ☐	Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☑

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes ☐    No ☑

Aggregate market value of voting stock held by non-affiliates of the registrant as of July 1, 2023	$	10,394,183,650
Number of shares of common stock outstanding as of February 12, 2024	137,550,564

DOCUMENTS INCORPORATED BY REFERENCE

The information required by Part III of this Report, to the extent not set forth herein, is incorporated herein by reference from the registrant's definitive proxy statement relating to the 2024 Annual Meeting of Stockholders, which definitive proxy statement shall be filed with the Securities and Exchange Commission within 120 days after the end of the fiscal year to which this Report relates.

 

---

Table of Contents

 

Note Regarding Forward-Looking Statements

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. These involve estimates, assumptions, risks, and uncertainties. Any statements about our expectations, beliefs, plans, objectives, assumptions, or future events or performance are not historical facts and may be forward-looking. We use words or phrases such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “intend,” “plan,” "possible," “predict,” “projects,” “may,” “will,” “should,” “continue,” “ongoing,” “future,” “potential,” and similar words or phrases to identify forward-looking statements.

Forward-looking statements include, but are not limited to, statements about: our target or expected financial performance and our ability to achieve those results; future impacts of the ongoing military conflicts between Ukraine and Russia, and in the Middle East, and the outbreak of new, or expansion of current, military conflicts or terrorism; the impact of any continuing trade or travel restrictions on the export and import of products between the U.S. and China; the impact of any deterioration in relations between Taiwan and China, and other factors affecting military, political, or economic conditions in Taiwan or elsewhere in Asia; the impact of tariffs, trade sanctions, license requirements or similar actions on our suppliers and customers; the impact of inflationary pressures; future impacts of global pandemics, epidemics, and other public health problems; the effects of climate change and disruptive natural disasters on us, our suppliers, and our consumers, including as a result of actions by governments, businesses, and consumers in response; our business strategy; our opportunities to increase our addressable market; our expectations and strategies regarding market trends and opportunities, including market drivers such as wireless and wireline communications infrastructure deployments, data center servers and networking equipment, client computing platforms, industrial Internet of Things, factory automation, robotics, automotive electronics, smart homes, prosumers, and other applications; our expectations regarding the growth of AI-related revenue; our beliefs about who we may compete with and whether we are differentiated from those competitors, as well as their potential capabilities; our expectations regarding our customer base and the impacts of our customers’ actions on our business; our expectations regarding both new and existing product offerings; our gross margin growth and our strategies to achieve gross margin growth and other financial results; our future investments in research and development; our ability to take advantage of the process technology development efforts of semiconductor foundries and apply those technologies when they become most economically beneficial to us and to our customers; the impact of changing foundries or OSATs (as defined below) or their failure to manufacture sufficient quantities of our products at acceptable yields, as well as the impact of problems with other subcontractors or distributors; the impact if we are unable to detect product defects; the impact if our insurance proves to be inadequate to resolve claims against us; whether we will experience seasonality or cyclicality and the resulting effects on our business; our expectations about our patent portfolio, including the expiration of patents, whether, when and where we will make future filings, and the value of the patents and associated licensing agreements generally and to our business, as well as risks arising from the licensing and sale of our patents; our ability to attract and retain personnel and their importance to our performance; future financial results or accounting treatments; our judgments involved in accounting matters, including revenue recognition, inventories and cost of revenue, and income taxes; actions we may take regarding the design and continued effectiveness of our internal controls over financial reporting; our use of cash; our beliefs regarding the adequacy of our liquidity, capital resources and facilities; the impact of our debt on our future operating and financial performance, as well as the impact if we breach a loan covenant; whether we will consider and act upon acquisition opportunities to extend our product, technology and product offerings and the impact of such opportunities on our business; our expectations regarding taxes, including unrecognized tax benefits, and tax adjustments and allowances; whether we will pursue future stock repurchases and how any future repurchases will be funded; the future price volatility of our stock and the effects of that volatility; our ability to prevent and respond to information technology system failures, security breaches and incidents, cyberattacks or fraud, and the occurrence and impact of such cybersecurity incidents; the costs of mitigating cybersecurity risks; the impact of artificial intelligence (“AI”); the impact of laws and regulations addressing privacy, data protection, and cybersecurity and our ability to comply with the same; our ability to comply with other laws and regulations, the costs of such compliance, and costs incurred if we fail to comply with such laws and regulations; and our beliefs regarding legal or administrative proceedings.

These forward-looking statements are based on estimates and assumptions that are subject to risks and uncertainties that could cause actual results to differ materially from those statements expressed in the forward-looking statements. The key factors, among others, that could cause our actual results to differ materially from the forward-looking statements include global economic conditions and uncertainty, including as a result of trade-related restrictions or tariffs; inflationary pressures; the effect of any downturn in the economy on capital markets and credit markets; the effects of global military conflicts, pandemics or widespread global health problems and the actions by governments, businesses, and individuals in response to the situation, the effects of which may give rise to or amplify the risks associated with many of these factors listed here; the concentration of our sales in certain end markets, particularly as it relates to the concentration of our sales in the Asia Pacific region; market acceptance and demand for our existing and new products; market and technology trends; our ability to achieve yield and quality improvements; our ability to protect, license and sell our intellectual property; shortages or increased costs in our supply chain; any disruption of our distributors or distribution channels; the impact of competitive products and pricing, especially by companies with great resources than us; unanticipated warranty claims; our failure to prevent or adequately respond to information technology system failures, security breaches and incidents, cyberattacks, or fraud; physical and transition disruptions and costs associated with climate change; unanticipated taxation requirements or positions of the U.S. Internal Revenue Service or other taxing authority; unanticipated effects of tax reform; unfavorable results of legal proceedings; our ability to attract and retain key personnel; the sufficiency of our insurance coverage; the impact of our outstanding indebtedness on our strategic flexibility, liquidity and results of operations; the impact of strategic transactions; or unexpected impacts of accounting guidance. In addition, actual results are subject to other risks and uncertainties that relate more broadly to our overall business, including those more fully described herein and that are otherwise described from time to time in our filings with the Securities and Exchange Commission ("SEC"), including, but not limited to, the items discussed in Part I, Item 1A, “Risk Factors,” in this Annual Report on Form 10-K.

You should not unduly rely on forward-looking statements because our actual results could differ materially from those expressed by us. In addition, any forward-looking statement applies only as of the date of this filing. We do not plan to, and undertake no obligation to, update any forward-looking statements to reflect new information or new events, circumstances or developments, or otherwise.

PART I

Item 1. Business

Overview

Lattice Semiconductor Corporation and its subsidiaries (“Lattice,” the “Company,” “we,” “us,” or “our”) develop technologies that we monetize through differentiated programmable logic semiconductor products, system solutions, design services, and licenses. Lattice is the low power programmable leader. We solve customer problems across the network, from the Edge to the Cloud, in the Communications, Computing, Industrial, Automotive, and Consumer markets. Our technology, long-standing relationships, and commitment to world-class support enable our customers to create a smart, secure, and connected world.

Our field programmable gate array ("FPGA") devices enable us to provide our customers with a strong, growing base of control, connect, and compute technologies. We believe there are multiple growth areas that will allow us to increase our addressable market. In particular, we believe there are several emerging trends in servers, infrastructure, and smart devices that are opportunities for Lattice:

To serve these needs, customer solutions require power efficiency, memory bandwidth, processing power, and the ability to integrate complex functionality into a highly compact footprint. These requirements align with the capabilities of our FPGA devices. Our flexible, low power, small form factor, performance optimized FPGAs put us in a unique position to meet these growing market needs.

Our Markets and Customers

We sell our products globally in three end market groups: Communications and Computing, Industrial and Automotive, and Consumer. We also provide Intellectual Property ("IP") licensing and services to these end markets.

In the Communications and Computing Market, our solutions play key roles in computing systems such as servers and client devices, 5G wireless infrastructure, switches, routers, and other related applications.

Our Communications and Computing customers need to address a variety of challenges.

Lattice FPGAs help solve these customer problems. Our FPGAs are optimized for input/output ("I/O") expansion, hardware acceleration, and hardware management. Our FPGAs consume power at very low rates, which reduces operating costs. Their small form factor enables higher functional density in less space. Finally, our FPGAs are I/O rich, which allows for more connections with system application specific integrated circuits ("ASICs") and application specific standard products ("ASSPs").

Examples of where our products enable intelligent automation in the Industrial and Automotive Market include industrial Internet of Things ("IoT") and "Industry 4.0", machine vision, robotics, factory automation, advanced driver assistance systems ("ADAS"), and automotive infotainment.

Our Industrial and Automotive customers face numerous challenges:

Our product portfolio helps solve these challenges. Our small-sized, low-power FPGAs not only provide the I/O expansion, bridging, connectivity, and processing inherent in FPGAs, but they also form the backbone of several integrated solutions, including motor control, complete High Definition ("HD") camera and DVR solutions on a single FPGA device, and Human-Machine Interfaces ("HMI") on a chip.

In the Consumer Market, you can find our solutions making products smarter and smaller, including smart home devices, prosumer devices, sound bars, high end projectors, Augmented Reality ("AR") / Virtual Reality ("VR"), and wearables.

Our Consumer customers are driven by the need to deliver richer and more responsive experiences. They typically require:

Lattice FPGAs bring multiple benefits to these customers. An FPGA’s parallel architecture enables faster processing than competing devices, such as microcontrollers, allowing for a user experience with shorter pauses and fewer delays. Our FPGAs are among the most power efficient in the industry, enabling the application processor and other high-power components to remain dormant longer, resulting in longer battery life. Finally, with some of the industry’s smallest packages, we enable thinner and more compact end products.

Our proprietary solutions help our customers get their products to market faster than typical development cycles of custom ASICs. With re-programmability and flexibility, our FPGAs inherently allow our customers to have quicker product development. The time-to-market advantages of Lattice's solutions are critical given the shorter product life cycles in our customers’ end markets.

Our Products, Services, and Competition

We are focused on delivering FPGAs and related solutions to help solve our customers' problems. We also serve our customers with IP licensing and various other services.

Field Programmable Gate Arrays (“FPGAs”)

FPGAs are regular arrays of logic that can be custom-configured by the user through software. This programmability allows our customers flexibility and reduced time to market while allowing us to offer the chips to many different customers in many different markets. Lattice FPGA product families include:

To enable our customers to get to market faster we support our FPGAs with IP cores, reference designs, development kits, and design software. We are investing in our design software, such as Lattice Radiant™, to deliver best-in-class tools that enable predictable design convergence, and Lattice Propel™ for unparalleled ease in creating embedded processor-based designs. We have developed integrated system-level solution stacks, including Lattice Automate™ for industrial automation and robotics, Lattice mVision™ for low power embedded vision, Lattice ORAN™ for robust control data security, flexible fronthaul synchronization, and low power hardware acceleration for secure, adaptable, Open Radio Access Network (ORAN) deployment, Lattice sensAI™ for Edge AI applications, Lattice Sentry™ for implementing hardware security, and our newest solution stack - Lattice Drive™ for advanced, flexible automotive system designs and applications. Further, we have application software such as Glance by Mirametrix™ that allows users to control the AI and computer vision experience of their end systems for Client computing, industrial, and automotive applications.

Depending on the application, we may compete with other FPGA vendors, as well as producers of ASICs, ASSPs, and microcontrollers. We believe that Lattice has developed products and solutions with differentiated advantages.

Legacy Semiconductor Products

We also sell Video Connectivity ASSPs, although we are not developing new products in this area and their support requirements are minimal.

IP Licensing and Services

Lattice has a broad set of technological capabilities and many U.S. and international patents. We generate revenue from our technology portfolio via upfront fees and on-going royalty payments through the following activities:

Research and Development

We place a substantial emphasis on new product development, where return on investment is the key driver. We believe that continued investment in research and development is required to maintain and improve our competitive position. Our research and development activities are focused on new proprietary products, advanced packaging, existing product enhancements, software development tools, soft IP cores, and application focused hardware and software solutions. These research and development activities occur primarily at our sites in Hillsboro, Oregon; San Jose, California; Montreal, Canada; Shanghai, China; Muntinlupa City, Philippines; and Penang, Malaysia.

We believe that a continued commitment to research and development is essential to maintaining product leadership and providing a strong cadence of innovative new product offerings and, therefore, we expect to continue to make significant future investments in research and development.

Operations

We operate primarily as a fabless semiconductor provider and, therefore, we maintain strategic relationships with large, established semiconductor foundries to source our finished silicon wafers and manufacture our silicon products. This strategy allows us to focus our internal resources on product and market development and eliminate the fixed cost of owning and operating manufacturing facilities. We are able to take advantage of the ongoing advanced process technology development efforts of semiconductor foundries and apply those technologies when they become most economically beneficial to us and to our customers.

We rely on third party vendors to provide cost-effective and efficient supply chain services. Among other activities, these outsourced services relate to inventory management and warehousing, lead time management, order fulfillment, and the shipment of inventory to third party distributors.

Wafer Fabrication

Lattice partners with Taiwan Semiconductor Manufacturing Company ("TSMC") to develop and manufacture on 16nm technology, which is used in our Avant platform of FPGA products, and to manufacture our 350nm, 130nm, 55nm and 40nm products. We partner with Samsung Semiconductor ("Samsung") to develop and manufacture the first low-power FPGA on 28nm fully depleted silicon-on-insulator ("FD-SOI") technology, which is used in our Nexus platform of FPGA products. We partner with United Microelectronics Corporation ("UMC") and its subsidiary United Semiconductor Japan Corporation ("USJC") to manufacture our products on its 130nm, 90nm, 65nm, and 40nm CMOS process technologies, as well as embedded flash memory in these process nodes. We partner with Seiko Epson ("Epson") to manufacture our 500nm, 350nm, 250nm and 180nm products.

We source silicon wafers from our foundry partners, TSMC, Samsung, UMC, USJC, and Epson, pursuant to agreements with each company and their respective affiliates. We negotiate wafer volumes, prices, and other terms with our foundry partners and their respective affiliates on a periodic basis.

Assembly

All of our assembly and test operations are performed by industry-leading outsourced assembly and test suppliers ("OSATs") with our primary supplier being Advanced Semiconductor Engineering, Inc. ("ASE"). We perform certain test operations as well as reliability and quality assurance processes internally during the development process. We have achieved and maintained ISO9001:2015 Quality Management Systems Certification and released a line of products qualified to the AEC-Q100 Reliability Standard in support of Automotive product offerings in addition to ISO26262 certification on both Automotive products and software.

After wafer fabrication and initial testing, we ship wafers to independent subcontractors for assembly. During assembly, wafers are separated into individual die and encapsulated in plastic packages. We have qualified two major assembly partners, ASE and Amkor Technology ("Amkor") and are second sourced where volume and customer requirements are necessary. All ASE and Amkor manufacturing of our products is in Asia. We negotiate assembly prices, volumes, and other terms with our assembly partners and their respective affiliates on a periodic basis.

We currently offer an extensive list of standard products in lead (Pb) free packaging. Our lead-free products meet the European Parliament Directive entitled "Restrictions on the use of Hazardous Substances" ("RoHS"). A select and growing subset of our RoHS compliant products are also offered with a "Halogen Free" material set.

Testing (Sort and Final Test)

We electrically sort test the die on most wafers prior to shipment for assembly. Wafer sort testing is primarily performed by ASE in Taiwan and Malaysia, Amkor in Japan, and our second source, King Yuan Electronics Co. (“KYEC”) in Taiwan.

Following assembly, but prior to customer shipment, each product undergoes final testing and quality assurance procedures. Final testing is performed by ASE and Amkor.

Sales and Revenue

We generate revenue by monetizing our technology designs and patents through product and technology sales. This involves distribution channel and direct sales of silicon-based hardware and silicon-enabling products, as well as the licensing or sale of IP that we have developed or acquired, some of which we use in our products, and certain design services that we may provide.

Sales and Customers

We primarily sell our products to customers from Lattice Semiconductor Corporation or our wholly-owned subsidiary, Lattice SG Pte. Ltd. Independent distributors are significant customers, and a substantial portion of our sales are made into this channel. Additionally, we sell both directly and through a network of independent manufacturers' representatives. We also employ a direct sales management and field applications engineering organization to support our end customers and indirect sales resources. End customers for our products are primarily Original Equipment Manufacturers ("OEMs") in the Communications and Computing, Industrial and Automotive, and Consumer end markets. Our sales team attempts to drive multi-generational design wins within these OEMs and leverages our distribution partners to grow our broad customer base.

We provide global technical support to our end customers with engineering staff based at our headquarters, product development centers, and selected field sales offices. We maintain numerous domestic and international field sales offices in major metropolitan areas.

In fiscal years 2023, 2022, and 2021, sales to distributors accounted for approximately 87%, 89%, and 87%, respectively, of our net revenue. We depend on our distributors to sell our products to end customers, complete order fulfillment, and maintain sufficient inventory of our products. Our distributors also provide technical support and other value-added services to our end customers. We have multiple global distributors. We also have regional distribution in Asia, Japan, Europe, and Israel, and we sell through three major on-line distributors. Revenue from foreign sales as a percentage of total revenue was 82%, 86%, and 88% for fiscal 2023, 2022, and 2021, respectively. We assign revenue to geographies based on ship-to location of our customers. Both foreign and domestic sales are denominated in U.S. dollars.

Backlog

Our backlog consists of orders from distributors and certain OEMs that generally require delivery within the next year. Historically, our backlog has not been a predictor of future sales or customer demand for the following reasons:

Seasonality

We periodically experience variability in our sales volumes and financial results due to seasonal trends in the end markets we serve, the cyclical nature of the semiconductor industry, and general economic conditions.

IP, Patents, and Licensing

We seek to protect our products, technologies, and IP primarily through patents, trade secrets, copyrights, trademark registrations, licensing restrictions, confidentiality agreements, and other approaches designed to protect proprietary information. We hold numerous United States and international patents and have patent applications pending in the United States and internationally. In addition to protecting innovations designed into our products, our ownership and maintenance of patents is an important factor in the determination of our share of the royalties from the implementation of the HDMI standard. Our current patents will expire at various times over the next 20 years, subject to our payment of periodic maintenance fees. We believe that our patents have value, and we expect to file future patent applications in both the United States and abroad on significant inventions, as we deem appropriate. We have acquired various licenses from third parties to certain technologies that are implemented in IP cores or embedded in our products. These licenses support our continuing ability to make and sell these products to our customers. While our various IP rights are important to our success, we believe our business as a whole is not materially dependent on any particular patent or license, or any particular group of patents or licenses.

Human Capital Management

We provide a safe and positive work environment that emphasizes respect for individuals, ethical conduct, and learning and development that is facilitated by a direct employee engagement model. The health and safety of our employees is of utmost importance to us. We undertake appropriate actions to safeguard the health and well-being of our employees and our business. Recognizing and respecting our global presence, we strive to maintain a diverse and inclusive workforce everywhere we operate. As of December 30, 2023, we had 1,156 employees worldwide.

We believe our employees are the foundation of our success and that our future growth depends, in part, on our ability to continue to attract and retain key executive, technical, sales, and management personnel. Due to our growth and cadence of new product introductions we are particularly focused on highly skilled engineers involved in the design, development, and support of new and existing products and processes. In order for us to attract the best talent, we provide a collaborative, diverse, inclusive, and innovative work environment, competitive compensation, and recognition to give our employees the opportunity to grow. We are focused on developing diverse teams and continuing to build an inclusive culture that inspires leadership, encourages innovative thinking, and supports the development and advancement of all.

Our human capital management objectives include identifying, recruiting, incentivizing, and integrating our existing and future employees. We strive to attract and retain talented employees by offering competitive compensation and benefits that support their health, financial, and emotional well-being. Our compensation philosophy is based on rewarding each employee’s individual and team contributions and striving to achieve equal pay for equal work. We use a combination of fixed and variable pay including base salary, bonuses, performance awards, and stock-based compensation. The principal purposes of our equity incentive plans are to attract, retain, and motivate employees through the granting of stock-based compensation awards. We offer employees benefits that vary by country and are designed to address local laws and cultures and to be competitive in the marketplace.

Corporate Information and Public Information Availability

Our corporate headquarters are located at 5555 NE Moore Court, Hillsboro, Oregon 97124, and our website is www.latticesemi.com. Information contained or referenced on our website is not incorporated by reference into, and does not form a part of, this Annual Report on Form 10-K. Our common stock trades on the NASDAQ Global Select Market under the symbol LSCC.

We make available, free of charge through the Investor Relations section of our website at ir.latticesemi.com, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements and amendments to those reports and statements as soon as reasonably practicable after such materials are electronically filed with, or furnished to, the SEC. You may also obtain free copies of these materials by contacting our Investor Relations Department at 5555 NE Moore Court, Hillsboro, Oregon 97124, telephone (503) 268-8000. Our SEC filings are also available at the SEC's website at www.sec.gov.

Our Investor Relations website also provides notifications of news or announcements regarding our financial performance and other items that may be material or of interest to our investors and for complying with our disclosure obligations under Regulation FD, including SEC filings, press releases, earnings releases, and webcasts of our earnings calls. Further, corporate governance information, including our corporate governance policies, director code of ethics, code of conduct, board committee charters, conflict minerals report and conflict minerals policy, is also available on the investor relations section of our website.

The content on any website referred to in this filing is not incorporated by reference into this filing unless expressly noted otherwise.

ITEM 1A. Risk Factors

The following risk factors and all of the other information included in this Annual Report on Form 10-K should be carefully considered in their entirety before making an investment decision relating to our common stock. If any of the risks described below occur, our business, financial condition, operating results, and cash flows could be materially adversely affected, and the trading price of our common stock could decline. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial condition, and operating results. Effects from global business or political events, and the related impacts to economic and operating conditions, may further affect the volatility or degree of known and unknown risks.

Risk Factor Summary

Factors Related to Economic, Political, Legal & Regulatory Business Conditions

Factors Related to Manufacturing our Products

Factors Related to Intellectual Property

Factors Related to Overall Business & Operations

Factors Related to Our Markets and Product Development

Factors Related to Our Sales and Revenue

General Risk Factors

Factors Related to Economic, Political, Legal & Regulatory Business Conditions

Our global business operations expose us to various economic, political, and business risks, which could impact our business, operating results and financial condition.

We have significant domestic and international operations. Our international operations include foreign sales offices to support our international customers and distributors, which account for the majority of our revenue, and operational and research and development sites in China, the Philippines, Malaysia, and other Asian locations. In addition, we purchase our wafers from foreign foundries; have our commercial products assembled, packaged, and tested by subcontractors located outside of the United States; and rely on international service providers for a variety of services, including inventory management, lead time management, technical support, factory engagement meetings, and order fulfillment.

Worldwide political and economic conditions may create uncertainties that could adversely affect our business. For example, the military conflict between Israel and Hamas and the potential for regional expansion, the continuing military conflict between Ukraine and Russia, as well as the financial and trade-related restrictions associated with Russia and Belarus and economic sanctions on certain individuals and entities in Russia and Belarus, may further disrupt global supply chains and could result in shortages of key materials that our suppliers and foundry partners require to satisfy our needs. Additionally, the U.S. government has implemented controls regarding semiconductor- and supercomputer-related products and restrictions affecting U.S. persons’ ability to send certain chips and chip-related technology and software to China without an export license. These, as well as future controls impacting the semiconductor ecosystem, may impact the global supply chain and could result in shortages of key materials that our suppliers and foundry partners require to satisfy our needs. Any deterioration in the relations between Taiwan and China, and other factors affecting military, political or economic conditions in Taiwan or elsewhere in Asia, could adversely impact our third-party manufacturing partners and suppliers located in the region, which could disrupt our business operations. Countries in Europe and Asia have proposed, or recently adopted, significant increases in their military budgets and the outbreak of new, or expansion of current, military conflicts could adversely affect our business. Furthermore, adverse macroeconomic conditions, such as rising inflation and labor shortages, may affect demand for our products or increase our product or labor costs, negatively impacting our revenues, gross margins, and overall financial results.

Our domestic and international business activities are subject to economic, political and regulatory risks, including: increased inflation; volatility in financial markets; fluctuations in consumer liquidity; changes in interest rates; price increases for materials and components; trade barriers or changes in trade policies; political instability; acts of war or terrorism; natural disasters; economic sanctions; weak economic conditions; environmental regulations; labor regulations; disruptions to labor markets; import and export regulations; tax or freight rates; duties; trade restrictions; interruptions in transportation or infrastructure; anti-corruption laws; domestic and foreign governmental regulations; potential vulnerability of and reduced protection for intellectual property; disruptions or delays in production or shipments; and instability or fluctuations in currency exchange rates, any of which could lead to decreased demand for our products or a change in our results of operation. Although our business has not been materially impacted by supply chain constraints, inflation, or labor market disruptions, events outside of our control could have a material adverse impact on our business, operating results, and financial condition in the future. Uncertainty about future political and economic conditions makes forecasting demand and providing guidance difficult. Accordingly, our expectations are subject to change without warning and investors are cautioned not to place undue reliance on them.

Our business could suffer as a result of tariffs and trade sanctions or similar actions.

The imposition by the United States of tariffs, sanctions or other restrictions on goods imported from outside of the United States or countermeasures imposed in response to such government actions could adversely affect our operations or our ability to sell our products globally, which could adversely affect our operating results and financial condition. The materials subject to these tariffs may impact the cost of raw materials used by our suppliers or in our customers’ products. The imposition of further tariffs by the United States on a broader range of imports, or further retaliatory trade measures taken in response to additional tariffs, could increase costs in our supply chain or reduce demand of our customers’ products, either of which could adversely affect our results of operations.

Our customers or suppliers could also become subject to U.S. regulatory scrutiny or export restrictions. For example, in 2019 the U.S. Justice Department filed criminal charges against one of our customers in China and imposed a licensing requirement on this customer with a policy of denial for some items, which has limited our ability to do business with this customer. In 2020, the U.S. imposed additional regulatory restrictions on the sale of U.S. controlled technology to customers in China. These restrictions include establishing additional licensing requirements in order to sell U.S.-originated technology for certain applications or to companies that participate in the Chinese national security supply chain. These restrictions also limit the fabrication of devices for certain Chinese companies where U.S. technology is involved in the fabrication process. Furthermore, in August 2020 the U.S. established additional licensing requirements for one of our China customers and its affiliates that limit any sales of products to that customer or for that customer’s products absent a license. The U.S. government may add additional Chinese companies to its restricted entity list or impose additional licensing requirements that we may be unable to meet in a timely manner or at all. Additionally, in October 2022 the U.S. government announced controls regarding semiconductor- and supercomputer-related products and restrictions affecting U.S. persons’ ability to send certain chips and chip-related technology and software to China without an export license, which may impact the global supply chain and could negatively affect our business. These controls and restrictions were revised by the U.S. government in October 2023 with the intent to further restrict China’s ability to obtain such technology and to enhance U.S. national security interests.

Where license requirements are imposed, there can be no assurance that the U.S. government will grant licenses to permit the continuation of business with these customers. Future sanctions similar to those imposed in the past and to those recently imposed could adversely affect our ability to earn revenue from these and similar customers. In addition, the imposition of sanctions or other restrictions on customers in China may cause those customers to seek domestic alternatives to our products and those of other United States semiconductor companies. Further, the Chinese government has developed an unreliable entity list, which limits the ability of companies on the list to engage in business with Chinese customers. We cannot predict what impact these and future actions, sanctions or criminal charges could have on our customers or suppliers, and therefore our business. If any of our other customers or suppliers become subject to sanctions or other regulatory scrutiny, if our customers are affected by tariffs or other government trade restrictions, or if we become subject to retaliatory regulatory measures, our business and financial condition could be adversely affected.

Our global business operations expose us to various legal and regulatory risks, which could impact our business, operating results and financial condition.

If we fail to comply with the many laws and regulations to which we are subject, both within the United States and internationally, we may be subject to significant fines, penalties or liabilities for noncompliance, which could harm our business and financial results. For example, we are subject to federal, state and foreign laws and regulations concerning data privacy and security, including the EU General Data Protection Regulation (“GDPR), and U.S. state and local laws that govern the privacy and security of information, such as the California Consumer Privacy Act (“CCPA”). Other countries outside of the European Union, including the United Kingdom and China, also have enacted robust legislation addressing privacy, data protection, and cybersecurity and providing for substantial penalties for noncompliance. These and other regulatory frameworks are evolving rapidly, and we anticipate that our efforts to comply with evolving laws and regulations addressing privacy, data protection, and cybersecurity will be a rigorous and time-intensive process that may increase our cost of doing business and may require us to change our policies and practices. Additionally, as a public company, we are subject to the requirements of federal securities laws, requirements of the Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Consumer Protection Act, the rules and regulations of the SEC, and the listing standards of the Nasdaq Stock Market. Noncompliance with these requirements could result in penalties, fines, liabilities, or reputational harm, which could harm our business or financial results. We are also subject to import/export regulations and applicable executive orders. These laws, regulations, and orders are complex, may change frequently and with limited notice, and have generally and may continue to become more stringent over time.

Any inability or perceived inability to adequately comply with applicable laws or regulations could result in claims, demands, and litigation by private actors or governmental authorities, investigations and other proceedings by governmental authorities, injunctive relief, fines, penalties, and other liabilities, any of which may harm our reputation and market position and could adversely affect our business, financial condition, and results of operations.

Pandemics or other widespread public health problems could adversely affect our business, results of operations, and financial condition in a material way.

Pandemics, epidemics or other widespread public health problems could negatively impact our business. Outbreaks have resulted, and could again, result in significant government measures to control the spread of disease, including, among others, restrictions on travel, manufacturing, and the movement of employees. Jurisdictions in which we operate have had varying responses to pandemic and other widespread public health problems and the impact of such responses is difficult to anticipate. If, for example, pandemics were to occur in ways that significantly disrupt the manufacture, shipment, and buying patterns of our products or the products of our customers, this may materially negatively impact our operating results, including revenue, gross margins, operating margins, cash flows and other operating results, and our overall business. Disruptions to manufacturing and shipping could also constrain our supplies, leading to operational delays, disruptions and inflationary pressures. Our customers may also experience closures of their manufacturing facilities or inability to obtain other components, either of which could negatively impact demand for our solutions.

The ultimate impact of a pandemic on our operations and financial performance depends on many factors that are not within our control, including, but not limited, to: governmental, business, and individuals’ responses; general economic uncertainty in key global markets; volatility in financial markets, labor markets, and supply chains; global economic conditions and levels of economic growth; and the pace of recovery when the pandemic subsides. Pandemics may negatively impact the overall economy and, as a result of the foregoing, could negatively impact our operating results and may do so in a material way. In particular, pandemics or other widespread public health problems may increase or change the severity of our other risks reported in this Annual Report on Form 10-K.

Factors Related to Manufacturing our Products

We rely on subcontractors to supply and fabricate silicon wafers and to perform assembly and test operations for our semiconductor products. If they are unable to do so on a timely and cost-effective basis in sufficient quantities and using competitive technologies, we may incur significant costs or delays.

We rely on foundries in Japan, Korea and Taiwan to supply and fabricate silicon wafers for our semiconductor products, including Taiwan Semiconductor Manufacturing, Samsung Semiconductor, United Microelectronics Corporation, and Seiko Epson. We rely on our OSATs in Malaysia, Taiwan and Japan to support the packaging and test of our products, including Advanced Semiconductor Engineering and Amkor Technology. Our success is dependent upon our ability to successfully partner with our foundry and OSAT suppliers and their ability to produce wafers and finished semiconductor products with competitive prices and performance attributes, including smaller process geometries, which ability may be impacted by labor market disruptions and rising inflation. Establishing, maintaining and managing multiple foundry and OSAT relationships requires the investment of management resources and costs.

If we fail to maintain our foundry and OSAT relationships, if these partners do not provide facilities and support for our development efforts, if they are insolvent or experience financial difficulty, if their operations are interrupted by a widespread public health hazard, or if we elect or are required to change foundries or OSATs, we may incur significant costs and delays. If our foundry or OSAT partners are unable to, or do not, manufacture sufficient quantities of our products at acceptable yields, we may be required to allocate the affected products among our customers, prematurely limit or discontinue the sales of certain products, or incur significant costs to transfer products to other foundries or OSATs, which could adversely affect our customer relationships and operating results. Further, our subcontractors are themselves subject to many of the same operational and business risks that we face and describe herein that, if occur and are disruptive to their operations, could adversely affect us.

Our margins are dependent on our achieving continued yield and quality improvements, cost reductions, and the supply and cost of wafers and materials.

We rely on obtaining yield, quality, productivity, and logistic improvements and corresponding cost reductions in the manufacture of existing products and on introducing new products that incorporate advanced features and other price/performance factors that enable us to increase revenues while maintaining acceptable margins. To the extent that such cost reductions and new product introductions do not occur in a timely manner, because of inflation, increases in personnel costs, employee turnover, or other factors, or that our products do not achieve market acceptance or market acceptance at acceptable pricing, our margins, operating results, and financial condition could be materially adversely affected.

Furthermore, worldwide manufacturing capacity for our products may be impacted by many factors which may impact availability and cost. If the demand for silicon wafers or assembly material exceeds market supply, or if suppliers increase prices to cover the cost of rising inflation, our supply of silicon wafers or assembly material could quickly become limited or prohibitively expensive. A shortage in manufacturing capacity could hinder our ability to meet product demand and therefore reduce our revenue. Silicon wafers constitute a material portion of our product cost, and if we are unable to purchase wafers at favorable prices, due to supply constraints, inflation, or other factors, our margins, results of operations, and financial condition may be adversely affected.

We may be subject to warranty claims and other costs related to our products.

In general, we warrant our products for varying lengths of time against non-conformance to our specifications and certain other defects. Because our products, including hardware, software, and intellectual property cores, are highly complex and increasingly incorporate advanced technology, our quality assurance programs may not detect all defects, whether these are specific manufacturing defects affecting individual products or these are systemic defects that could affect numerous shipments. Our inability to detect a defect could result in a diversion of our engineering resources from product development efforts, increased engineering expenses to remediate the defect, and increased costs due to customer accommodation or inventory impairment charges. On occasion, we have also repaired or replaced certain components, made software fixes, or refunded the purchase price or license fee paid by our customers due to product or software defects. Our insurance may be inadequate to protect against these issues. If there are significant product defects, the costs to remediate such defects, net of reimbursed amounts from our vendors, if any, or to resolve warranty claims may adversely affect our financial condition and results of operations and may harm our reputation.

Factors Related to Intellectual Property

The intellectual property licensing component of our business strategy increases our business risk and fluctuation of our revenue and margins.

Our business strategy includes licensing our intellectual property to companies that incorporate it into their technologies that address multiple markets, including markets where we participate and compete. Our Licensing and services revenue may be impacted by the introduction of new technologies by customers in place of the technologies we license, changes in the law that may weaken our ability to prevent the use of our patented technology by others, the expiration of our patents, and changes of demand or selling prices for products using licensed patents. We cannot assure that our licensing customers will continue to license our technology on commercially favorable terms or at all, or that these customers will introduce and sell products incorporating our technology, accurately report royalties owed to us, pay agreed upon royalties, honor agreed upon market restrictions, or maintain the confidentiality of our proprietary information, or will not infringe upon or misappropriate our intellectual property. Our intellectual property licensing agreements are complex and may depend upon many factors that require significant judgments, including completion of milestones, allocation of values to delivered items and customer acceptance.

Our sale of patents and intermittent significant licensing transactions can cause material fluctuations in our revenue and gross margins.

We have generated revenue from the sale of certain patents from our portfolio in the past, generally for non-core technology that we are no longer actively developing. While we plan to continue to monetize our patent portfolio through sales of non-core patents, we may not be able to realize adequate interest or prices for those patents. Accordingly, we cannot provide assurance that we will continue to generate revenue from these sales. In addition, although we seek to be strategic in our decisions to sell patents, we might incur reputational harm if a purchaser of our patents sues one of our customers for infringement of the purchased patent, and we might later decide to enter a space that requires the use of one or more of the patents we sold. In addition, as we sell groups of patents, we no longer have the opportunity to further sell or to license those patents and receive a continuing royalty stream.

Our Licensing and services revenue fluctuates, sometimes significantly, from period to period because it is heavily dependent on a few key transactions being completed in a given period, the timing of which is difficult to predict and may not match our expectations. Licensing and services revenue may include revenue from the sales of patents, which may be difficult to complete and which may have complex terms for the payment which affects revenue recognition. Because of its high margin, the Licensing and services revenue portion of our overall revenue can have a disproportionate impact on gross profit and profitability. In addition, generating revenue from patent sales and intellectual property licenses is a lengthy and complex process that may last beyond the period in which our efforts begin, and the accounting rules governing the recognition of revenue from patent sales and intellectual property licensing transactions are increasingly complex and require significant judgment. As a result, the amount of license revenue recognized in any period may differ significantly from our expectations.

Our participation in the HDMI standard is evolving, and our share of adopter fees and royalties for the HDMI standard is subject to variability.

We share HDMI royalties with the other HDMI Founders based on an allocation formula, which is reviewed generally every three years. In the fourth quarter of fiscal 2019, the HDMI Founders adopted a new agreement covering the five-year period beginning January 1, 2018. The HDMI Founders are currently negotiating a new agreement covering the next sharing period beginning January 1, 2023. The amount of our portion of the royalty allocation is dependent on the royalties generated by adopter sales of royalty-bearing HDMI technology, which are subject to variability in economic trends particularly in the market for consumer electronics.

If we are unable to adequately protect our new and existing intellectual property rights globally, our financial results and our ability to compete effectively may suffer.

Our success depends in part on our proprietary technology, and we rely upon patent, copyright, trade secret, mask work, and trademark laws to protect our intellectual property globally. We intend to continue to protect our proprietary technology, however, we may be unsuccessful in asserting our intellectual property rights or such rights may be invalidated, violated, circumvented, or challenged. From time to time, third parties, including our competitors, have asserted against us patent, copyright, and other intellectual property rights to technologies that are important to us. Third parties may attempt to misappropriate our intellectual property through electronic or other means or assert infringement claims against us in the future. Such assertions by third parties may result in costly litigation, indemnity claims, or other legal actions, and we may not prevail in such matters or be able to license any valid and infringed patents from third parties on commercially reasonable terms. This could result in the loss of our ability to import and sell our products or require us to pay costly royalties to third parties in connection with sales of our products. Any infringement claim, indemnification claim, or impairment or loss of use of our intellectual property could materially adversely affect our financial condition and results of operations.

Factors Related to Overall Business & Operations

Our business depends on the use of information technology systems. A failure of these systems, cybersecurity incidents, or cyber-fraud may cause business disruptions, compromise our intellectual property or other sensitive information, or result in losses.

We rely on information technology ("IT") networks and systems to collect, process, maintain, use, share, disseminate, and dispose of our information and manage our operations, including financial reporting. Our IT systems are subject to power and telecommunication outages and other system failures. Further, despite our current security measures, our IT systems may be vulnerable to cybersecurity threats and suffer cybersecurity incidents. These systems are also supported by subcontractors and third-party providers who may also be subject to power and telecommunication outages or other general system failures and cybersecurity threats and cybersecurity incidents. The legal, regulatory and contractual environments surrounding information security, data privacy, and data protection are complex and evolving. We continue to commit significant resources to implementing new systems to standardize our processes worldwide and to develop our capabilities in these areas. We are focused on realizing the full analytical functionality of these conversions, which can be extremely complex, in part, because of the wide range of legacy systems and processes that must be integrated.

In the normal course of business, we may implement new or updated IT systems and, as a result, we may experience delays or disruptions in the integration of these systems, or the related procedures or controls. The policies and security measures established with our IT systems may be vulnerable to cybersecurity incidents such as security breaches and cyberattacks, or cyber-fraud. We may also encounter corruption or loss of data, an inability to accurately process or record transactions, and security or technical reliability issues. All of these could harm our ability to conduct core operating functions such as processing invoices, shipping and receiving, recording and reporting financial and management information on a timely and accurate basis, and could impact our internal control compliance efforts. If the technical solution or end user training are inadequate, it could limit our ability to manufacture and ship products as planned. Moreover, the proper functioning of the internal processes that the IT systems and networks support relies on qualified employees. Competition for qualified employees has generally increased across the economy in the United States, which, if we experience employee turnover, could lead to disruptions in our processes, inadequate end user training or difficulty updating our IT systems and networks.

We maintain sensitive data on our networks and on the networks of our business partners and third-party providers, including proprietary and confidential information relating to our intellectual property, personnel, and business, and that of our customers and third-party providers. Companies have been increasingly subject to a wide variety of cybersecurity incidents such as cyberattacks, hacking, phishing, malware, ransomware, and other attempts to gain unauthorized access to systems or data, or to engage in fraudulent behavior. Cyberattacks have become more prevalent, sophisticated and much harder to detect and defend against and it is often difficult to anticipate or detect such incidents on a timely basis and to assess the damage caused by them. In addition, our agreements with third-party providers, including but not limited to the liability limitations and insurance provisions contained in such agreements, may be inadequate to cover the liability, if any, associated with any security breaches. Increasing geopolitical tensions or conflicts have also created, and may continue to create, a heightened risk of cyberattacks, and AI and other evolving technologies may also increase the prevalence and impact of cyberattacks. Our policies and security measures cannot guarantee security, and our IT infrastructure, including our networks and systems, may be vulnerable to security breaches and cybersecurity incidents, cyberattacks, or cyber-fraud. In the past, third parties have attempted to penetrate and/or infect our network and systems with malicious software and phishing attacks in an effort to gain access to our network and systems. In addition, we are subject to the risk of third parties falsifying invoices and similar fraud, including by obtaining unauthorized access to our vendors’ and business partners’ networks. Although past threats and incidents have not resulted in a material adverse effect, we may incur material losses related to cybersecurity and other threats or incidents in the future.

In some circumstances, we may partner with third-party providers and provide them with certain data, including sensitive data, or the ability to access or otherwise process such data. These third parties also face substantial security risks from a variety of sources. There can be no assurance that any security measures that we or our third-party service providers have implemented will be effective against current or future security threats, and we cannot guarantee that our systems and networks or those of our third-party service providers have not been breached or otherwise compromised, or that they and any software in our or their supply chains do not contain bugs, vulnerabilities, or compromised code that could result in a breach of or disruption to our systems and networks or the systems and networks of third parties that support us and our services. If any of our third-party providers fails to adopt or adhere to adequate data security practices, or suffers a security breach or incident, any data, including sensitive data, that we provide them or that they otherwise may access or process for us may be improperly accessed, used, disclosed, modified, lost, destroyed, or rendered unavailable. Any security breaches or incidents that we or our third-party providers may suffer could compromise our intellectual property, expose sensitive business information and otherwise result in unauthorized access to or disclosure, modification, misuse, loss, destruction, or other processing of sensitive information. We may need to expend significant financial and development resources to analyze, correct, eliminate, or work around errors or defects or to eliminate or otherwise address security vulnerabilities, and we and our third-party service providers may face difficulties or delays in identifying or otherwise responding to any potential security breach or incident.

Further, the increase in cyberattacks has resulted in an increased focus on cybersecurity by certain government agencies. Any cyberattack or other security breach or cybersecurity incident that we or our third-party providers may suffer, or the perception that any such attack, breach, or incident has occurred, could result in a loss of customer confidence in our security measures, damage to our brand, reputation, and market position, result in unauthorized access to or disclosure, modification, misuse, loss, corruption, unavailability, or destruction of our data or other sensitive data that we or our third-party providers process or maintain, disrupt normal business operations, require us to spend material resources to investigate or correct any breach or incident and to prevent future security breaches and incidents, expose us to legal claims and liabilities, including litigation, regulatory investigations and enforcement actions, and indemnity obligations, and adversely affect our revenues and operating results. Further, any such actual or perceived breach or incident, and any claims, demands, litigation, or investigations or enforcement actions related to cybersecurity could cause us to incur significant remediation costs, result in product development delays, disrupt key business operations, and divert attention of management and key IT resources. In addition, we may incur loss as a result of cyber-fraud, such as those experienced by other companies by making unauthorized payments irrespective of robust internal controls.

Failure or disruptions of our IT systems or difficulties or delays in maintaining, managing, and integrating them could adversely affect our controls and procedures and could impact our ability to perform necessary operations, which could materially adversely affect our business.

The costs of maintaining our cybersecurity risk management program, as well as the costs of mitigating cybersecurity risks, are significant and are likely to increase in the future. These costs include, but are not limited to, maintaining software and services to prevent and detect cybersecurity threats and incidents, retaining the services of cybersecurity providers; compliance costs arising out of existing and future cybersecurity, data protection and privacy laws and regulations; and costs related to maintaining redundant networks, data backups and other damage-mitigation measures.

We cannot be certain that our insurance coverage will be adequate for cybersecurity liabilities incurred and, will cover any indemnification claims against us relating to any incident, that insurance will continue to be available to us on economically reasonable terms, or at all, or that any insurer will not deny coverage as to any future claim. The successful assertion of one or more large claims against us that exceed available insurance coverage, or the occurrence of changes in our insurance policies, including premium increases or the imposition of large deductible or co-insurance requirements, could have a material adverse effect on our business, including our financial condition, operating results, and reputation.

Our insurance may not adequately cover certain risks and, as a result, our financial condition and results may be adversely affected.

We carry insurance customary for companies in our industry, including, but not limited to, liability, property, and casualty; workers' compensation; cyber liability; and business interruption insurance. We also insure our employees for basic medical expenses. In addition, we have insurance contracts that provide director and officer liability coverage for our directors and officers. Other than the specific areas mentioned above, we are self-insured with respect to most other risks and exposures, and the insurance we carry in many cases is subject to a significant policy deductible or other limitation before coverage applies. Based on management's assessment and judgment, we have determined that it is more cost effective to self-insure against certain risks than to incur the insurance premium costs. The risks and exposures for which we self-insure include, but are not limited to, certain natural disasters, certain product defects, certain matters for which we indemnify third parties, political risk, certain theft, patent infringement, and employment practice matters. Should there be a catastrophic loss due to an uninsured event (such as an earthquake) or a loss due to adverse occurrences in any area in which we are self-insured, our financial condition or operating results could be adversely affected.

We may incur indebtedness which could reduce our strategic flexibility and liquidity and may have other adverse effects on our results of operations.

Our amended and restated credit agreement, dated September 1, 2022 (the “2022 Credit Agreement”) allows us to draw up to $350 million. While as of December 30, 2023, we had no borrowings outstanding under the 2022 Credit Agreement, the incurrence of indebtedness could impact the Company. Our obligations under the 2022 Credit Agreement are guaranteed by certain of our U.S. subsidiaries meeting materiality thresholds set forth in the 2022 Credit Agreement, and the revolving loans under the 2022 Credit Agreement may be reborrowed and repaid at our discretion, with any remaining outstanding principal amount due and payable on the maturity date of the revolving loan facility on September 1, 2027. Our ability to meet our debt service obligations depends upon our operating and financial performance, which is subject to general economic and competitive conditions and to financial, business and other factors affecting our operations, many of which are beyond our control. If we are unable to service our debt, we may need to sell material assets, restructure or refinance our debt, or seek additional equity capital. Prevailing economic conditions and global credit markets could adversely impact our ability to sell material assets, restructure or refinance our debt on terms acceptable to us, or at all, or we may not be able to restructure or refinance our debt without incurring significant additional fees and expenses.

The 2022 Credit Agreement contains customary affirmative and negative covenants, including covenants limiting the ability of the Company and our subsidiaries to, among other things, incur debt, grant liens, undergo certain fundamental changes, make investments, make certain restricted payments, dispose of assets, enter into transactions with affiliates, and enter into burdensome agreements, in each case, subject to limitations and exceptions set forth in the 2022 Credit Agreement. We are also required to maintain compliance with a total net leverage ratio and an interest coverage ratio, in each case, determined in accordance with the terms of the 2022 Credit Agreement. 

The amount and terms of our indebtedness, as well as our credit rating, could have important consequences, including the following:

If we breach a loan covenant, the lenders could accelerate the repayment of the facility. We might not have sufficient assets to repay our indebtedness upon acceleration. If we are unable to repay or refinance the indebtedness upon acceleration or at maturity, the lenders could initiate a bankruptcy proceeding against us or collection proceedings with respect to our assets and subsidiaries securing the facility, which could materially decrease the value of our common stock.

Unfavorable or uncertain market conditions and risks relating to the adoption, use or application of emerging technologies, including artificial intelligence (“AI”), by our customers and in our business, may impact financial results and could result in reputational and financial harm and liability.

The adoption of AI solutions may not develop in the manner or in the time periods we anticipate and as the markets for AI solutions are still developing, demand for these products may be unpredictable and may vary significantly from one period to another. These factors may adversely impact demand for our AI related products including our products that support AI solutions. In addition, compliance with government regulations and unfavorable developments with evolving laws and regulations worldwide related to these products and suppliers may increase the costs related to the development of AI products and solutions and limit global adoption, which may also adversely impact demand for our AI related products.

Concerns relating to the responsible use of new and evolving technologies, such as AI, in our and our customers’ products and services may result in reputational and financial harm and liability. We and our customers are increasingly building AI capabilities into many products and services. AI poses emerging ethical issues and presents risks and challenges that could affect its adoption, and therefore our business. If we or our customers enable or offer solutions that draw controversy due to their perceived or actual impact on society, such as AI solutions that have unintended consequences or are controversial, we may experience reputational harm, competitive harm or legal liability.

Additionally, while we restrict the use of third-party and open source AI tools, such as ChatGPT, the internal governance of the adoption of these technologies can be challenging, and our employees and consultants may use these tools on an unauthorized basis and our partners may use these tools, which poses additional risks relating to the protection of data, including the potential exposure of our proprietary confidential information to unauthorized recipients and the misuse of our or third-party intellectual property. Use of AI tools may result in allegations or claims against us related to violation of third-party intellectual property rights, unauthorized access to or use of proprietary information and failure to comply with open source software requirements. AI tools may also produce inaccurate responses that could lead to errors in our decision-making, product development or other business activities, which could have a negative impact on our business, operating results and financial condition. Our ability to mitigate these risks will depend on our continued effective maintaining, training, monitoring and enforcement of appropriate policies and procedures governing the use of AI tools, and the results of any such use, by us or our partners.

Climate change and climate change-related policies and regulations may have a long-term impact on our business.

Climate-related risks are inherent wherever our business is conducted. Global climate change is causing, and is projected to continue to cause, an increase in the frequency and intensity of certain natural disasters and adverse weather, such as drought, wildfires, storms, sea-level rise, flooding, heat waves, and cold waves, occurring more frequently or with greater intensity. Such extreme events are driving changes in market dynamics, stakeholder expectations, and local, national and international climate change policies and regulations, any of which could result in disruptions to us, our suppliers, vendors, customers and logistics hubs, and may impact employees’ abilities to commute or to work from home effectively. These disruptions could make it more difficult and costly for us to deliver our products and services, obtain components or other supplies through our supply chain, maintain, or resume operations or perform other critical corporate functions, and could reduce customer demand for our products and services.

The increasing concern over climate change could also result in transition risks such as shifting customer preferences. Changing customer preferences may result in increased expectations regarding our solutions, products, and services, including the use of packaging materials and other components in our products and their environmental impact. These expectations may cause us to incur additional costs or make other changes to our operations to respond to them, which could adversely affect our financial results. If we fail to manage transition risks and customer expectations in an effective manner, customer demand for our solutions, products, and services could diminish, and our profitability could suffer. Concerns over climate change, as well as the adoption of new laws or regulations, may also impact market dynamics and may result in shifts in customer expectations, preferences, or requirements, which may require us to change our practices or incur increased costs or adversely impact customer demand for our products and services.

Additionally, concerns over climate change have resulted in, and are expected to continue to result in, the adoption of legal and regulatory requirements designed to address climate change, as well as legal and regulatory requirements requiring certain climate-related disclosures. Where new laws or regulations are more stringent than current legal or regulatory requirements, we may experience increased compliance burdens and costs to meet such obligations. These laws could cause us to incur additional direct costs for compliance, as well as indirect costs resulting from our customers, suppliers or both incurring additional compliance costs that are passed on to us. These legal and regulatory requirements, as well as investor expectations, on corporate environmental and social responsibility practices and disclosure, are subject to change, can be unpredictable, and may be difficult and expensive for us to comply with, given the complexity of our supply chain and our significant outsourced manufacturing. If we are unable to comply, or are unable to cause our suppliers or subcontractors to comply, with such policies or provisions or meet the requirements of our customers and investors, a customers may stop purchasing products form us or an investor may sell their shares, and may take legal action against us, which could harm our reputation, revenue, and results of operations.

Climate change also may reduce the availability or increase the cost of insurance for these negative impacts of natural disasters by contributing to an increase in the incidence and severity of such natural disasters. Ultimately, the impacts of climate change, whether involving physical risks (such as disruptions resulting from climate-related events or rising sea levels) or transition risks (such as regulatory changes, changes in market dynamics or increased operating costs, including the cost of insurance) are expected to be widespread and unpredictable and may materially adversely affect our business and financial results.

Factors Related to Our Markets and Product Development

The semiconductor industry routinely experiences cyclical market patterns and our products are used across different end markets. A significant downturn in the industry or in any of these end markets could cause a meaningful reduction in demand for our products and adversely affect our operating results.

The semiconductor industry is highly cyclical and subject to downturns, such as we are currently seeing, and our revenue and gross margin can fluctuate significantly due to such downturns. These downturns can be severe and prolonged and can result in price erosion and weak demand for our products. Weak demand for our products resulting from general economic conditions affecting the end markets we serve, or the semiconductor industry specifically, and reduced spending by our customers can result, and in the past has resulted, in diminished product demand, high inventory levels, erosion of average selling prices, excess and obsolete inventories and corresponding inventory write-downs. Our expense levels are based, in part, on our expectations of future sales. Many of our expenses, particularly those relating to facilities, capital equipment, and other overhead, are relatively fixed. We might be unable to reduce spending quickly enough to compensate for reductions in sales. Accordingly, shortfalls in sales could adversely affect our operating results. Furthermore, any significant upturn in the semiconductor industry could result in increased competition for access to raw materials and third-party service providers.

Additionally, our products are used across different end markets, and demand for our products is difficult to predict and may vary within or among our Industrial and Automotive, Communications and Computing, and Consumer end markets. Our target markets may not grow or develop as we currently expect, and demand may increase or change in one or more of our end markets, and changes in demand may reduce our revenue, lower our gross margin and effect our operating results. We have experienced concentrations of revenue at certain customers and within certain end markets, and we regularly compete for design opportunities at these customers and within these markets. Any deterioration in these end markets, reductions in the magnitude of revenue streams, our inability to meet design and pricing requirements, or volatility in demand for our products could lead to a reduction in our revenue and adversely affect our operating results. Our success in our end markets depends on many factors, including the strength or financial performance of the customers in our end markets, our ability to timely meet rapidly changing product requirements, market needs, and our ability to maintain design wins across different markets and customers to dampen the effects of market volatility. The dynamics of the markets in which we operate make prediction of and timely reaction to such events difficult.

Due to these and other factors, our past results may not be reliable predictors of our future results. If we are unable to accomplish any of the foregoing, or to offset the volatility of cyclical changes in the semiconductor industry or our end markets through diversification into other markets, these factors could materially and adversely affect our business, financial condition, and operating results.

Our success and future revenue depend on our ability to develop and introduce new products that achieve customer and market acceptance.

We compete in a dynamic environment characterized by rapid technology and product evolution, generally followed by a relatively longer process of ramping up to volume production on advanced technologies. Our end customers’ continued use of our products is frequently reevaluated, as certain of our customers' product life cycles are relatively short and they continually develop new products. The selection process for our products to be included in our customers' new products is highly competitive. There are no guarantees that our products will be included in the next generation of products introduced by these customers. Additionally, our markets are also characterized by evolving industry standards and increased demand for more features and performance, which requires higher levels of integration and more advanced process technology. Our competitive position and success depend on our ability to innovate, develop, and introduce new products that compete effectively on the basis of price, density, functionality, power consumption, form factor, and performance, and our ability to address the evolving needs of the markets we serve, among other things. With increased introduction of new products, we expect revenue related to mature products to decline over time in a normal product life cycle. As a result, we may be increasingly dependent on revenue derived from our newer products.

Our future growth and the success of new product introductions depend upon numerous factors, including:

The failure of any of these factors, among others, could adversely affect our product innovation, development and introduction efforts and our financial condition and results of operations.

We compete against companies that have significantly greater resources than us and numerous other product solutions.

The semiconductor industry is highly competitive and many of our direct and indirect competitors have substantially greater financial, technological, manufacturing, marketing, and sales resources than us. Consolidation in our industry may increasingly mean that our competitors have greater consolidated resources, or other synergies, including the ability to attract qualified employee or incorporate higher costs into product and service prices, that could put us at a competitive disadvantage. We currently compete directly with companies that have licensed our technology or have developed similar products, as well as numerous semiconductor companies that offer products based on alternative solutions, such as applications processor, application specific standard product, microcontroller, analog, and digital signal processing technologies. Competition from these semiconductor companies may intensify as we offer more products in any of our end markets. These competitors include established, multinational semiconductor companies, as well as emerging companies.

We depend on independent contractors and third parties to provide key services in our product development and operations, and any disruption of their services, or an increase in cost of these services, could negatively impact our financial condition and results of operations.

We depend on subcontractors to provide cost effective and efficient services in our product development and supply chain functions, including test and assembly services, software and hardware development, support of intellectual property cores, inventory management, lead time management, technical support, and order fulfillment.

Our operations and operating results may be adversely affected if we experience problems with our subcontractors that impact the delivery of product to our customers. These problems may include: schedule delays or defects in software or hardware development deliverables; prolonged inability to obtain wafers or packaging materials with competitive performance and cost attributes; inability to achieve adequate yields or timely delivery; inability to meet customer timelines or demands; disruption or defects in assembly, test, or shipping services; or delays in stabilizing manufacturing processes or ramping up volume for new products. If our third-party supply chain providers were to reduce or discontinue services for us or their operations are disrupted as a result of a fire, earthquake, act of terrorism, political unrest, governmental uncertainty, war, disease, or other natural disaster or catastrophic event, weak economic conditions, inflation, recession, labor market disruptions, or any other reason, our financial condition and results of operations could be adversely affected.

Factors Related to Our Sales and Revenue

Our revenues depend on our relationships with our distributors and on a concentrated group of end customers. An adverse change in the relationships with, or performance of, our distributors, or any reduction in the use of our products by our end customers, could harm our sales and significantly decrease our revenue.

We depend on a concentrated group of distributors to sell our products to end customers, complete order fulfillment, maintain sufficient inventory of our products and provide services to our end customers. In fiscal 2023, revenue attributable to sales to distributors accounted for 87% of our total revenue, with two distributors accounting for 52% of total revenue. We have significant outstanding receivables with our top distributors, and expect our distributors to generate a significant portion of our revenue in the future. Any adverse change to our relationships or agreements with our distributors, a failure by one or more of our distributors to perform its obligations to us, a reduction in a distributor's business volume with us, or consolidation in the distribution industry could have a material impact on our business, including a reduction in our access to certain end customers, or our ability to sell our products.

If our relationships with any material customers were to diminish, if these customers were to develop their own solutions or adopt alternative solutions or competitors' solutions, if any one or more of our concentrated groups of customers were to experience significantly adverse financial conditions, including as a result of inflation, economic slowdown or recession, or labor market disruptions, or if as a result of trade disputes or sanctions these customers were restricted from purchasing our products, our results could be adversely affected.

In addition, the inability of customers to obtain credit, the insolvency of one or more customers, or tariffs applicable to our customers’ products, could impact our sales. Any of these effects could impact our ability to effectively manage inventory levels and collect receivables, require additional restructuring actions, and decrease our revenue and profitability.

The nature of our business and length of our sales cycle makes our revenue, gross margin, net income, and inventory subject to fluctuation and difficult to accurately predict.

A number of factors, including how products are manufactured to support end markets, yield, wafer pricing, cost of packaging raw materials, product mix, market acceptance of our new products, competitive pricing dynamics, product quality, geographic and/or end market mix, and pricing strategies, can cause our revenue, gross margins, net income, and inventory to fluctuate significantly either positively or negatively from period to period.

We have limited visibility into the demand for our products, particularly new products, because demand for our products depends upon our products being designed into our end customers' products and those products achieving market acceptance. During our sales cycle, our customers typically test and evaluate our products prior to deciding to include our products into the design of their own products, and then require additional time to begin volume production of their products. This lengthy sales cycle may cause us to incur significant expenses, which could be exacerbated by rising inflation, significant production delays, or additional inventory costs before we receive a customer order that may be delayed or never get placed. A key strategic customer may demand certain design or production resources to meet their requirements or work on a specific solution, which could cause delays in our normal development schedule and result in significant investment of our resources or missed opportunities with other potential customers. We may incur these expenses without generating revenue from our products to offset the expenses.

While our sales cycles are typically long, our average product life cycles can be short as a result of the rapidly changing technology environment in which we operate. From time to time, our inventory levels may be higher than historical norms due to inventory build decisions aimed at meeting expected demand, ramping for new products, reducing direct material cost, or enabling responsiveness to expected demand. In the event the expected demand does not materialize, or if our short sales cycle does not generate sufficient revenue, we may be subject to incremental excess and obsolescence costs.

These factors make it difficult for us to accurately forecast future sales and project quarterly revenues. The difficulty in forecasting future sales weakens our ability to project our inventory requirements, which could result, and in the past has resulted, in inventory write-downs or failure to meet customer product demands in a timely manner. While we may issue guidance, difficulty in forecasting financial performance, relative customer and product mix, and the unpredictability of unknown variables and their impact on our financial performance may impair the accuracy of our forward-looking financial measures.

Accounting requirements related to sales through our distribution channel could result in our reporting revenue in excess of demand.

Revenue recognition standards require recognition of revenue based on estimates and may require us to record revenue from distributors that is in excess of actual end customer demand. Since we have limited ability to forecast inventory levels of our end customers, we depend on the timeliness and accuracy of resale reports from our distributors. Late or inaccurate resale reports could mask significant build-up of inventories in our distribution channel, have a detrimental effect on our ability to properly recognize revenue, and impact our ability to forecast future sales. An inventory build-up in our distribution channel could result in a slowdown in orders, requests for returns from customers, or requests to move out planned shipments. If our distributors do not ultimately sell the inventory and our estimates change, we could be required to materially correct our recognized revenue in a future period, depending on actual results. Any failure to manage these challenges could disrupt or reduce sales of our products and unfavorably impact our financial results.

General Risk Factors

Business disruptions could seriously harm our future revenue, cash flows, and financial condition and increase our costs and expenses.

Our worldwide operations and supply chain could be disrupted by natural or human-induced disasters including, but not limited to, earthquakes, tsunamis, or floods; hurricanes, cyclones, or typhoons; fires, or other extreme weather conditions; power or water shortages; telecommunications failures; materials scarcity and price volatility; manufacturing equipment failures; IT system failures; cybersecurity attacks; data breaches; medical epidemics or pandemics; terrorist acts, civil unrest, military actions, conflicts, or wars; or other natural or man-made disasters or catastrophic events.

The occurrence of any of these business disruptions could adversely affect our competitive position and result in significant losses, decrease demand for our products, seriously harm our revenue, profitability and financial condition, increase our costs and expenses, make it difficult or impossible to provide services or deliver products to our customers or to receive components from our suppliers, create delays and inefficiencies in our supply chain, result in the need to impose employee travel restrictions, and require substantial expenditures and recovery time in order to fully resume operations. The impacts and frequency of any of the above could furthermore be exacerbated by climate change, particularly in countries where we, or our suppliers or customers, operate that have limited infrastructure and disaster recovery resources.

Our operations and those of our significant suppliers and distributors could be adversely affected if manufacturing, logistics, or other operations in key locations, including logistics hubs in Asia, are disrupted for any reason, such as those described above or other economic, business, labor, environmental, public health, regulatory or political reasons. In addition, even if our operations are unaffected or recover quickly, if our customers cannot timely resume their own operations due to a catastrophic event, they may reduce or cancel their orders, or these events could otherwise result in a decrease in demand for our products. Although it is impossible to completely predict the occurrences or consequences of any such events, forecasting disruptive events and building additional resiliency into our operations accordingly will become an increasing business imperative.

The trading price of our common stock has been and may continue to be subject to volatility in response to a variety of factors.

Our common stock has experienced substantial price volatility in the past and may continue to do so in the future. Additionally, the technology industry and the stock market as a whole has experienced extreme volatility that often has been unrelated to the performance of particular companies. The trading price of our common stock has and may continue to fluctuate widely due to various factors, including, but not limited to, actual or anticipated fluctuations in our financial condition and operating results; changes in financial estimates by us or financial or other market estimates and ratings by securities and other analysts; our ability to develop new products, enter new market segments, gain market share, manage cybersecurity and litigation risk, diversify our customer base, and successfully secure manufacturing capacity; news regarding our products or products of our competitors; any mergers, acquisitions or divestitures of assets undertaken by us; inflationary conditions, interest rate changes, and recessionary concerns; regulatory changes to international trade policies, economic sanctions, or export controls, such as new licensing requirements for exporting certain chip-related technology to China; terrorist acts or acts of war, including the ongoing conflict between Ukraine and Russia; epidemics and pandemics; trading activity in our common stock, including stock repurchases, actions by institutional or other large stockholders, or our inclusion in market indices; or general economic, industry, and market conditions worldwide.

The volatility of our stock may cause the value of a stockholder’s investment to change rapidly. Investors in our common stock may not realize any return on their investment in us and may lose some or all of their investment. Additionally, if our stock price declines, it may be more difficult for us to raise capital and may have other adverse effects on our business. Stock price fluctuations could impact the value of our equity compensation, which could affect our ability to recruit and retain employees. Volatility in the trading price of our common stock could also result in the filing of securities class action litigation matters, which could result in substantial costs and the diversion of management time and resources. For these reasons, investors should not rely on recent or historical trends to predict future trading prices of our common stock, financial condition, results of operations, or cash flows.

Litigation and unfavorable results of legal proceedings could adversely affect our financial condition and operating results.

From time to time, we are subject to various legal proceedings and claims that arise out of the ordinary conduct of our business. Certain claims may not yet be resolved, including but not limited to any that are discussed under Note 14 - Contingencies to our Consolidated Financial Statements in Part II, Item 8 of this report, and additional claims may arise in the future. Results of legal proceedings cannot be predicted with certainty. Regardless of merit or outcome, claims or litigation may be both time-consuming and disruptive to our operations and cause significant expense and diversion of management attention and we may enter into material settlements to avoid these risks. Should we fail to prevail in certain matters or enter into a material settlement, we may be faced with significant monetary damages or injunctive relief against us that could materially and adversely affect our financial condition and operating results and certain portions of our business.

Acquisitions, divestitures, strategic investments and strategic partnerships could disrupt our business and adversely affect our financial condition and operating results.

We may pursue growth opportunities by acquiring complementary businesses, solutions or technologies through strategic transactions, investments or partnerships. The identification of suitable acquisition, strategic investment or strategic partnership candidates can be costly and time consuming and can distract our management team from our current operations. If such strategic transactions require us to seek additional debt or equity financing, we may not be able to obtain such financing on terms favorable to us or at all, and such transaction may adversely affect our liquidity and capital structure. We may also choose to divest certain non-core assets, which divestitures could lead to charges against earnings and may expose us to additional liabilities and risks. Any strategic transaction might not strengthen our competitive position, may increase some of our risks, and may be viewed negatively by our customers, partners or investors. Even if we successfully complete a strategic transaction, we may not be able to effectively integrate the acquired business, technology, systems, control environment, solutions, personnel or operations into our business or global tax structure. We may experience unexpected changes in how we are required to account for strategic transactions pursuant to U.S. GAAP and may not achieve the anticipated benefits of any strategic transaction. We may incur unexpected costs, claims or liabilities that we incur during the strategic transaction or that we assume from the acquired company, or we may discover adverse conditions post acquisition for which we have limited or no recourse. We may also be a target for unsolicited acquisition or business combination offers. Appropriately reviewing and responding to any such offer can be costly and complex, and diverts the efforts and attention of management.

Item 1B. Unresolved Staff Comments

None.

Item 1C. Cybersecurity

Our cybersecurity risk management process is a component of our overall enterprise risk management process, through which our Chief Executive Officer and other members of senior management assess, identify, and manage material risks from cybersecurity threats we face. Our cybersecurity process seeks to protect our information systems by managing and reducing material risks from cybersecurity threats and by responding to and mitigating cybersecurity incidents. The Board of Directors (the “Board”), and the Audit Committee of the Board (the “Audit Committee”), provide oversight of our cybersecurity risk management process. The Audit Committee reviews our cybersecurity program and cybersecurity risk management process quarterly, and our Board reviews our cybersecurity program annually. Our cybersecurity program is directly managed by the Chief Information Officer (“CIO”), who is experienced in information systems and cybersecurity and whose team is responsible for leading enterprise-wide cybersecurity strategy, policy, standards, architecture, and processes. The CIO provides periodic updates to our Board and Audit Committee, as well as our Chief Executive Officer and other members of our senior management. These updates cover the Company’s material cybersecurity threats, the status of projects to strengthen our cybersecurity posture, and assessments of the cybersecurity program. Our cybersecurity risk management process is evaluated by internal and external cybersecurity experts, and the material results of those reviews are reported to senior management and the Board and Audit Committee as part of their oversight role. We also engage with third-party service providers deemed to have subject matter expertise in cybersecurity matters, industry participants, and law enforcement communities as part of our continuing efforts to evaluate and enhance the effectiveness of our cybersecurity policies and processes. We require each third-party service provider to certify that they implement and maintain appropriate security measures in connection with their work with us, and to promptly report any suspected breach of its security measures that may affect us. We use various tools and methodologies to manage cybersecurity risk and to prevent, detect, and mitigate cybersecurity incidents. Our tools and methodologies are tested regularly, including vulnerability scans, red-teaming exercises and other penetration testing, and review of cybersecurity threat intelligence feeds. We face risks from cybersecurity threats that could have a material adverse effect on our business, financial condition, results of operations, cash flows or reputation. We have experienced, and will continue to experience, cybersecurity incidents in the normal course of our business. However, prior cybersecurity incidents have not had a material adverse effect on our business, financial condition, results of operations, or cash flows. See “Risk Factors – Factors Related to Overall Business & Operations – Our business depends on the use of information technology systems. A failure of these systems, cybersecurity incidents, or cyber-fraud may cause business disruptions, compromise our intellectual property or other sensitive information, or result in losses.”

Item 2. Properties

We lease a 47,800 square foot space in Hillsboro, Oregon as our corporate headquarters and a research and development facility through October 2028.

In San Jose, California, we have 98,874 square feet under lease through September 2026, of which we use 49,579 square feet primarily for research and development. During 2019, we vacated a 23,680 square foot office space in Portland, Oregon, which we have subleased through the end of the lease in March 2025.

In Muntinlupa City, Philippines, we lease a total of 50,503 square feet through May 2025 for research and development and operations facilities. In Shanghai, China, we lease 68,027 square feet through May 2024 for research and development operations. In Penang, Malaysia, we lease 23,272 square feet through September 2029 for research and development and operations facilities. We also lease office facilities in multiple other metropolitan locations for our domestic and international sales staff. We believe that our existing facilities are suitable and adequate for our current and foreseeable future needs.

Item 3. Legal Proceedings

The information contained under the heading "Legal Matters" in Note 14 - Contingencies to our Consolidated Financial Statements in Part II, Item 8 of this report is incorporated by reference into this Part I, Item 3. Also, see “Litigation and unfavorable results of legal proceedings could adversely affect our financial condition and operating results” in “Risk Factors” in Item 1A of Part I of this Annual Report on Form 10-K.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant's Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities

Market Information

Our common stock is traded on the NASDAQ Global Select Market under the symbol "LSCC".

Holders

As of February 12, 2024, we had approximately 160 stockholders of record.

Dividends

The payment of dividends on our common stock is within the discretion of our Board of Directors. We intend to retain earnings to finance our business. We have never paid cash dividends.

Recent Sales of Unregistered Securities

None.

Issuer Purchases of Equity Securities

On August 8, 2022, we announced that our Board of Directors had approved a stock repurchase program pursuant to which up to $150 million of outstanding common stock could be repurchased from time to time (the "2023 Repurchase Program"). The duration of the 2023 Repurchase Program was through December 30, 2023. During the fourth quarter of fiscal 2023, we repurchased 872,994 shares for $50.2 million, or an average price paid per share of $57.49, under the 2023 Repurchase Program. All repurchases were open market transactions funded from available working capital. All shares repurchased pursuant to the 2023 Repurchase Program were retired by the end of the fourth quarter of fiscal 2023. We repurchased a total of 1,224,443 shares for $80.2 million, or an average price paid per share of $65.50, during fiscal year 2023.

On November 30, 2023, we announced that our Board of Directors had approved a stock repurchase program pursuant to which up to an additional $250 million of outstanding common stock could be repurchased from time to time (the "2024 Repurchase Program"). The duration of the 2024 Repurchase Program is through December 28, 2024. No shares were repurchased under the 2024 Repurchase Program during the fourth quarter of fiscal 2023.

The following table contains information regarding our repurchases of our common stock that is registered pursuant to Section 12 of the Securities Exchange Act of 1934 during the fourth quarter of fiscal 2023:

Comparison of Total Cumulative Stockholder Return

The following graph shows the five-year comparison of cumulative stockholder return on our common stock, the Standard and Poor's (“S&P”) 500 Index and the Philadelphia Semiconductor Index (“PHLX”) from December 2018 through December 2023. Cumulative stockholder return assumes $100 invested at the beginning of the period in our common stock, the S&P and PHLX. Historical stock price performance is not necessarily indicative of future stock price performance.

Lattice Cumulative Stockholder Return

Item 6. Reserved

Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations

Overview

Lattice Semiconductor Corporation and its subsidiaries (“Lattice,” the “Company,” “we,” “us,” or “our”) develop technologies that we monetize through differentiated programmable logic semiconductor products, silicon-enabling products, system solutions, design services, and licenses. Lattice is the low power programmable leader. We solve customer problems across the network, from the Edge to the Cloud, in the growing communications, computing, industrial, automotive, and consumer markets. Our technology, long-standing relationships, and commitment to world-class support lets our customers quickly and easily unleash their innovation to create a smart, secure, and connected world.

Lattice has focused its strategy on delivering programmable logic products and related solutions based on low power, small size, and ease of use. We also serve our customers with IP licensing and various other services. Our product development activities include new proprietary products, advanced packaging, existing product enhancements, software development tools, soft IP, and system solutions for high-growth applications such as Edge AI, 5G infrastructure, platform security, and factory automation.

This discussion and analysis of financial condition and results of operations should be read in conjunction with our consolidated financial statements and accompanying notes included in Part II, Item 8. "Financial Statements and Supplementary Data" of this report. Discussions of results for prior periods (fiscal 2022 compared to fiscal 2021) are incorporated by reference from our Annual Report on Form 10-K for the year ended December 31, 2022.

Impact of Global Economic Activity on our Business

Increased financial market volatility, inflationary pressure, rising interest rates, recessionary concerns, uncertainty in the financial and banking industry, and geopolitical tension continue to impact business globally and may impact our operations by causing disruption to our labor markets and supply chains. The extent to which increased financial market volatility, inflationary pressures, global pandemics, and related uncertainty will impact our business activities will depend on future developments that are highly uncertain and cannot be predicted at this time. Additionally, our business is impacted by the cyclic correction affecting the broader semiconductor industry, which has seen softened demand across our end markets and customers reducing or rebalancing their inventory levels.

Critical Accounting Policies and Use of Estimates

Critical accounting policies are those that are both most important to the portrayal of a company's financial condition and results of operations, and that require management's most difficult, subjective, and complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain.

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and judgments affecting the amounts reported in our consolidated financial statements and the accompanying notes. We base our estimates and judgments on historical experience, knowledge of current conditions, and our beliefs of what could occur in the future considering available information. While we believe that our estimates, assumptions, and judgments are reasonable, they are based on information available when made, and because of the uncertainty inherent in these matters, actual results may differ materially from these estimates under different assumptions or conditions. We evaluate our estimates and judgments on an ongoing basis.

We believe the following accounting policies and the related estimates are critical in the portrayal of our financial condition and results of operations, and require management's most difficult, subjective, or complex judgments. See Note 1 - Nature of Operations and Significant Accounting Policies to our Consolidated Financial Statements in Part II, Item 8 of this report for further information on the significant accounting policies and methods used in the preparation of the consolidated financial statements.

Revenue from Contracts with Customers

We recognize revenue upon satisfaction of performance obligations when control of promised goods or services has been transferred to our customers. We measure revenue based on the amount of consideration we expect to be entitled to in exchange for products or services. For revenue recognized on both sales to distributors and related to royalties, the amount of consideration we expect to be entitled to receive is based on estimates that require assumptions and judgments relating to trends in recent and historical activity. See Note 1 - Basis of Presentation and Significant Accounting Policies to our Consolidated Financial Statements in Part II, Item 8 of this report for further information on our recognition of revenue. Sales to most distributors are made under terms allowing certain price adjustments upon sale to their end customers and limited rights of return of our products held in their inventory. The revenue recognized based on estimated price adjustments and stock rotation reserves may be materially different from the actual consideration received if the actual distributor price adjustments and stock rotation returns differ significantly from the historical trends used in the estimates.

Inventories and Cost of Revenue

Inventories are stated at the lower of actual cost (determined using the first-in, first-out method) or net realizable value. We review and set standard costs quarterly to approximate current actual manufacturing costs. Our manufacturing overhead standards for product costs are calculated assuming full absorption of actual spending over actual costs. The valuation of inventory requires us to estimate excess or obsolete inventory. Material assumptions we use to estimate necessary inventory carrying value adjustments can be unique to each product and are based on specific facts and circumstances. In determining provisions for excess or obsolete products, we consider assumptions such as changes in business and economic conditions, projected customer demand for our products, and changes in technology or customer requirements. The creation of such provisions results in a write-down of inventory to net realizable value and a charge to Cost of revenue. If in any period we anticipate a change in assumptions such as future market or economic conditions to be less favorable than our previous estimates, additional inventory write-downs may be required and would be reflected in Cost of revenue, resulting in a negative impact to our gross margin in that period. If in any period we are able to sell inventories that had been written down to a level below the ultimate realized selling price in a previous period, related revenue would be recorded with a lower or no offsetting charge to Cost of revenue resulting in a net benefit to our gross margin in that period.

Accounting for Income Taxes

We are required to estimate our provision for income taxes and amounts ultimately payable or recoverable in numerous tax jurisdictions around the world. These estimates involve significant judgment and interpretations of regulations and are inherently complex. Resolution of income tax treatments in individual jurisdictions may not be known for many years after completion of the applicable year. Deferred tax assets and liabilities are recognized for the expected tax consequences of temporary differences between the tax bases of assets and liabilities and their reported amounts in the financial statements using enacted tax rates and laws that will be in effect when the difference is expected to reverse.

Valuation allowances are provided to reduce deferred tax assets to an amount that in management’s judgment is more-likely-than-not to be recoverable against future taxable income. The determination of a valuation allowance and when it should be released requires complex judgment. In assessing the ability to realize deferred tax assets, we regularly evaluate both positive and negative evidence that may exist and consider whether it is more-likely-than-not that some portion or all of the deferred tax assets will be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during the periods in which those temporary differences become deductible. In determining the need to establish or maintain a valuation allowance, we consider the four sources of jurisdictional taxable income: (i) future reversals of existing taxable temporary differences; (ii) future taxable income exclusive of reversing temporary differences and carryforwards; (iii) taxable income in prior carryback year(s) if carryback is permitted under the tax law; and (iv) viable and prudent tax planning strategies.

Through the end of fiscal 2023, we demonstrated consistent and continued profitability over the preceding three-year period. In assessing the realizability of the deferred tax assets, we considered our operating environment and estimates about our ability to generate taxable income in future periods within the United States. As a result, in the fourth quarter of fiscal 2023, we concluded that our history of profitable operating results, including the current period results, along with our expectations about generating sufficient U.S. Federal taxable income, provided sufficient positive evidence supporting the realizability of our U.S. Federal deferred tax assets. Accordingly, we reduced the valuation allowance against a significant portion of our U.S. deferred tax assets resulting in the inclusion of $56.9 million of U.S. Federal deferred tax assets on our Consolidated Balance Sheets.

We continue to maintain a full valuation allowance against our state deferred tax assets due to insufficient income sources. We will continue to evaluate both positive and negative evidence in future periods to determine if we will realize the deferred tax assets. The amount of the deferred tax asset considered realizable could be adjusted if sufficient positive evidence exists. We do not maintain a valuation allowance in any foreign jurisdictions as we have concluded that it is more likely than not that we will realize those net deferred tax assets in the future periods.

As part of our regular financial review process, we also assess the likelihood that our tax reporting positions will ultimately be sustained on examination by the taxing authorities, based on the technical merits of the position. To the extent it is determined it is more likely than not (a likelihood of more than 50 percent) that some portion or all of a tax reporting position will ultimately not be recognized and sustained, a provision for unrecognized tax benefit is provided by either reducing the applicable deferred tax asset or accruing an income tax liability. Our judgment regarding the sustainability of our tax reporting positions may change in the future due to changes in U.S. or international tax laws and other factors. These changes, if any, may require material adjustments to the related deferred tax assets or accrued income tax liabilities and an accompanying reduction or increase in income tax expense which may result in a corresponding increase or decrease in net income in the period when such determinations are made. We recognize the tax impact of including certain foreign earnings in U.S. taxable income as a period cost.

Results of Operations

Key elements of our Consolidated Statements of Operations, including as a percentage of revenue, are presented in the following table:

Revenue

Revenue increased $76.8 million, or 11.6%, in fiscal 2023 compared to fiscal 2022, primarily from increased demand for our products used in industrial automation, robotics applications, and data center servers, partially offset by lower demand for our products used in wireless infrastructure and consumer applications.

Revenue by End Market

We sell our products globally to a broad base of customers in three primary end market groups: Communications and Computing, Industrial and Automotive, and Consumer. Across our end markets, our products are increasingly used for Artificial Intelligence ("AI")-related applications, including device usage in AI-optimized servers in data centers, AI-enabled PCs, and AI-enabled robotics and ADAS systems, among others. We also provide IP licensing and services to our end markets.

Within these end markets, there are multiple drivers, including:

The end market data we use is derived from data provided to us by our customers. With a diverse base of customers who may manufacture end products spanning multiple end markets, the assignment of revenue to a specific end market requires the use of judgment. We also recognize certain revenue for which end customers and end markets are not yet known. We assign this revenue first to a specific end market using historical and anticipated usage of the specific products, if possible, and allocate the remainder to the end markets based on either historical usage for each product family or industry application data for certain product types.

The following are examples of end market applications for the fiscal years presented:

The composition of our revenue by end market is presented in the following table:

Revenue from the Communications and Computing end market decreased by 9% in fiscal 2023 compared to fiscal 2022 primarily due to softer end market demand in both wireless and wireline communications infrastructure, partially offset by strong demand in data center applications.

Revenue from the Industrial and Automotive end market increased by 36% in fiscal 2023 compared to fiscal 2022, primarily due to strong customer adoption in a broad range of applications, including industrial automation and robotics. Growth in Automotive was driven by the adoption of new designs in advanced driver assistance ("ADAS") and infotainment applications.

Revenue from the Consumer end market decreased by 21% in fiscal 2023 compared to fiscal 2022 primarily due to macroeconomic weakness in Consumer.

While we do not consider AI applications as a distinct end market, we expect AI-related revenue to grow over the next few years based on the growing pipeline of AI-related design wins.

Revenue by Geography

We have a diverse base of customers where distributors represent a significant portion of our total revenue. Our revenue by geographical market is based on the ship-to location of our customers, which can vary from time to time. Revenue from Asia decreased in fiscal 2023 compared to fiscal 2022 primarily due to the macroeconomic environment in the region, while revenue from the Americas and Europe increased due to increased demand in these regions driven by our Industrial and Automotive end market.

The composition of our revenue by geography is presented in the following table:

Revenue from Customers

We sell our products to independent distributors and directly to customers. Distributors have historically accounted for a significant portion of our total revenue, and the distributors noted below individually accounted for more than 10% of our total revenue in certain periods covered by this report.

The composition of our revenue by customer is presented in the following table:

Gross margin

The composition of our gross margin, including as a percentage of revenue, is presented in the following table:

Gross margin percentage increased 130 basis points from fiscal 2022 to fiscal 2023. Improved margins were driven by benefits from our gross margin expansion strategy including mix.

Operating Expenses

Research and Development Expense

The composition of our Research and development expense, including as a percentage of revenue, is presented in the following table:

Research and development expense includes costs for compensation and benefits, stock-based compensation, engineering wafers, depreciation and amortization, licenses, and outside engineering services. These expenditures are for the design of new products, IP cores, processes, packaging, and software solutions.

The increase in Research and development expense for fiscal 2023 compared to fiscal 2022 was due primarily to increased headcount-related costs, including stock-based compensation, as we continue to invest in our long-term product roadmap, and depreciation and amortization related to our research and development equipment.

We believe that investing in research and development is important to delivering innovative products to our customers and, therefore, we expect to continue to increase our investment in research and development.

Selling, General, and Administrative Expense

The composition of our Selling, general, and administrative expense, including as a percentage of revenue, is presented in the following table:

Selling, general, and administrative expense includes costs for compensation and benefits related to selling, general, and administrative employees, commissions, depreciation, professional and outside services, trade show, and travel expenses.

The increase in Selling, general, and administrative expense for fiscal 2023 compared to fiscal 2022 was due primarily to increased headcount-related costs, including stock-based compensation and other costs, related to demand creation to support the growth of our business.

Amortization of Acquired Intangible Assets

The composition of our Amortization of acquired intangible assets, including as a percentage of revenue, is presented in the following table:

The decrease in Amortization of acquired intangible assets for fiscal 2023 compared to fiscal 2022 was due to the end of the amortization period during the first quarter of fiscal 2022 for acquired intangible assets from previous acquisitions.

Restructuring

The composition of our Restructuring activity, including as a percentage of revenue, is presented in the following table:

Restructuring activity is generally comprised of expenses resulting from workforce reductions, cancellation of contracts, and consolidation of our facilities. Details of our restructuring plans and expenses incurred under them are discussed in Note 8 - Restructuring to our Consolidated Financial Statements in Part II, Item 8 of this report.

Restructuring costs decreased in fiscal 2023 compared to fiscal 2022 due to lower costs in the current year periods for severance compared to higher costs in the prior year periods for lease right-of-use impairment and contract termination fees.

Acquisition Related Charges

The composition of our Acquisition related charges, including as a percentage of revenue, is presented in the following table:

Acquisition related charges include legal and professional fees directly related to acquisitions. For fiscal 2022 and 2021, Acquisition related charges were attributable to our acquisition of Mirametrix in November 2021 and were comprised primarily of professional services including legal and accounting fees, as well as closing costs.

Interest Income (Expense), net

The composition of our Interest income (expense), net, including as a percentage of revenue, is presented in the following table:

The change in Interest income (expense) for fiscal 2023 compared to fiscal 2022 was driven by increased interest income, coupled with lower interest expense as we paid off the outstanding balance of our long-term debt during the third quarter of fiscal 2023.

Other Income (Expense), net

The composition of our Other income (expense), net, including as a percentage of revenue, is presented in the following table:

For fiscal 2023 compared to fiscal 2022, the change in Other income (expense), net was primarily due to a research credit of $0.9 million in the current year compared to the non-recurrence of $0.7 million of loss on the refinancing of our long-term debt in the prior year, and to foreign currency effects.

Income Taxes

The composition of our Income tax (benefit) expense is presented in the following table:

Our Income tax (benefit) expense includes taxes on foreign income and withholding taxes, partially offset by benefits resulting from excess tax benefits from stock-based compensation. In the fourth quarter of fiscal 2023, we reduced the valuation allowance against a significant portion of our U.S. deferred tax assets resulting in the inclusion of $56.9 million of U.S. Federal deferred tax assets on our Consolidated Balance Sheets. The income tax benefit from the release of a portion of the valuation allowance was partially offset by an increase in expense in fiscal 2023 as compared to fiscal 2022 primarily due to increased worldwide income and U.S. tax on foreign operations.

We updated our evaluation of the valuation allowance position in the United States through December 30, 2023. In making this evaluation, we considered our operating environment and estimates about our ability to generate taxable income in future periods within the United States. As a result of our consistent and continued profitability over the preceding three-year period and our expectations about generating sufficient U.S. Federal taxable income, we have determined that there is sufficient evidence that our U.S. Federal deferred tax assets are more likely than not to be realized.

We continue to maintain a full valuation allowance against our state deferred tax assets due to insufficient income sources. We will continue to evaluate both positive and negative evidence in future periods to determine if we will realize those deferred tax assets. The amount of the deferred tax asset considered realizable could be adjusted if sufficient positive evidence exists. We do not maintain a valuation allowance in any foreign jurisdictions as we have concluded that it is more likely than not that we will realize those net deferred tax assets in the future periods. Details of our deferred tax assets and valuation allowance are discussed in Note 12 - Income Taxes to our Consolidated Financial Statements in Part II, Item 8 of this report.

Liquidity and Capital Resources

The following sections discuss material changes in our financial condition from the end of fiscal 2022, including the effects of changes in our Consolidated Balance Sheets, and the effects of our credit arrangements and contractual obligations on our liquidity and capital resources. There continues to be uncertainty around the extent of market volatility, inflationary pressures, rising interest rates, recessionary concerns, uncertainty in the financial and banking industry, and geopolitical tension, which may impact our liquidity and working capital needs in future periods.

We have historically financed our operating and capital resource requirements through cash flows from operations, and from the issuance of long-term debt to fund acquisitions. Cash provided by or used in operating activities will fluctuate from period to period due to fluctuations in operating results, the timing and collection of accounts receivable, and required inventory levels, among other things. We believe that our financial resources, including current cash and cash equivalents, cash flow from operating activities, and our credit facilities, will be sufficient to meet our liquidity and working capital needs through at least the next 12 months. On September 1, 2022, we entered into our 2022 Credit Agreement, as described in Note 7 - Long-Term Debt to our Consolidated Financial Statements in Part II, Item 8 of this report. As of December 30, 2023, we did not have significant long-term commitments for capital expenditures. For further information on our cash commitments for operating lease liabilities, see Note 9 - Leases to our Consolidated Financial Statements in Part II, Item 8 of this report.

In the future, we may continue to consider acquisition opportunities to further extend our product or technology portfolios and further expand our product offerings. In connection with funding capital expenditures, acquisitions, securing additional wafer supply, increasing our working capital, or other operations, we may seek to obtain equity or additional debt financing. We may also seek to obtain equity or additional debt financing if we experience downturns or cyclical fluctuations in our business that are more severe or longer than we anticipated when determining our current working capital needs.

Liquidity

Cash and cash equivalents

As of December 30, 2023, we had Cash and cash equivalents of $128.3 million, of which approximately $36.1 million in Cash and cash equivalents was held by our foreign subsidiaries. We manage our global cash requirements considering, among other things, (i) available funds among our subsidiaries through which we conduct business, (ii) the geographic location of our liquidity needs, and (iii) the cost to access international cash balances. The repatriation of non-US earnings may require us to withhold and pay foreign income tax on dividends. This should not result in our recording significant additional tax expense as we have accrued expense based on current withholding rates. As of December 30, 2023, we could access all cash held by our foreign subsidiaries without incurring significant additional expense.

The net decrease in Cash and cash equivalents of $17.4 million between December 30, 2023 and December 31, 2022 was primarily driven by cash flows from the following activities:

Operating activities — Cash provided by operating activities results from net income adjusted for certain non-cash items and changes in assets and liabilities. Cash provided by operating activities was $269.6 million in fiscal 2023 compared to $238.8 million in fiscal 2022. This increase of $30.8 million was primarily driven by an increase of $40.1 million provided by improved operating performance, partially offset by $9.3 million of changes in working capital, primarily from cash used by accrued liabilities, payroll obligations, and accounts payable, net of cash provided by inventories.

Investing activities — Investing cash flows consist primarily of transactions related to capital expenditures and payments for software and intellectual property licenses. Net cash used by investing activities in fiscal 2023 was $33.3 million compared to $34.9 million in fiscal 2022. This $1.6 million decrease was primarily a result of decreased capital expenditures.

Financing activities — Financing cash flows consist primarily of activity on our long-term debt, repurchases of common stock, tax payments related to the net share settlement of restricted stock units, and proceeds from the exercise of options to acquire common stock. Net cash used by financing activities in fiscal 2023 was $253.7 million compared to $188.1 million in fiscal 2022. This $65.6 million increase was due to the following activities. During fiscal 2023, we made discretionary payments totaling $130.0 million on our revolving loans under the 2022 Credit Agreement, an increase of $99.8 million from the $30.2 million of net payment and refinancing activity on our long-term debt in fiscal 2022. We repurchased approximately 1.2 million shares of common stock for $80.0 million in fiscal 2023 compared to repurchases of approximately 2.0 million shares of common stock for $110.1 million in fiscal 2022. Payments for tax withholdings on vesting of RSUs partially offset by employee exercises of stock options used net cash flows of $43.7 million in fiscal 2023, a decrease of approximately $4.1 million from the net $47.8 million used in fiscal 2022.

Accounts receivable, net

Accounts receivable, net as of December 30, 2023 increased by approximately $10.4 million, or approximately 11%, compared to December 31, 2022. This resulted primarily from the timing of when our customers wanted our products to be shipped during the fourth quarter of fiscal 2023 compared to the fourth quarter of fiscal 2022. We calculate Days sales outstanding on the basis of a 365-day year as Accounts receivable, net at the end of the quarter divided by sales during the quarter annualized and then multiplied by 365.

Inventories

Inventories as of December 30, 2023 decreased $11.5 million, or approximately 11%, compared to December 31, 2022 primarily as a result of increased product shipments to meet customer demand.

The Days of inventory on hand ratio compares the inventory balance at the end of a quarter to the cost of sales in that quarter. We calculate Days of inventory on hand on the basis of a 365-day year as Inventories at the end of the quarter divided by Cost of sales during the quarter annualized and then multiplied by 365.

Credit Arrangements

On September 1, 2022, we entered into our 2022 Credit Agreement. The details of this arrangement are described in Note 7 - Long-Term Debt to our Consolidated Financial Statements in Part II, Item 8 of this report. As of December 30, 2023, we had no used or unused credit arrangements beyond the secured revolving loan facility described in the 2022 Credit Agreement.

Share Repurchase Program

See "Issuer Purchases of Equity Securities" under Part II, Item 5 of this Annual Report on Form 10-K for more information about the share repurchase program.

New Accounting Pronouncements

The information contained under the heading "New Accounting Pronouncements" in Note 1 - Nature of Operations and Significant Accounting Policies to our Consolidated Financial Statements in Part II, Item 8 of this report is incorporated by reference into this Part II, Item 7.

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

Market risk represents the risk of loss that may impact our financial position due to adverse changes in financial market prices and rates. Our market risk exposure is primarily a result of fluctuations in foreign currency exchange rates and interest rates. We assess these risks on a regular basis and have established policies that are designed to protect against the adverse effects of these and other potential exposures.

Foreign Currency Exchange Rate Risk

While our revenues and the majority of our expenses are denominated in U.S. dollars, our financial position and results of operations are subject to foreign currency exchange rate risk as a result of having various international subsidiary and branch operations. Historically, exposure to foreign currency exchange rate risk has not had a material impact on our results from operations. At times in the past, we have entered into foreign currency forward exchange contracts in relation to certain activities, which mitigated the foreign currency exchange rate exposure from an economic perspective, but these were not designated as "effective" hedges under U.S. GAAP.

Interest Rate Risk

Interest Income

Our interest income is sensitive to changes in the general level of interest rates. As of December 30, 2023, a hypothetical 100 basis point change in interest rates would have resulted in less than $1.5 million change in interest income.

Interest Expense

We may be exposed to interest rate risk via the terms of our 2022 Credit Agreement, which specifies an interest rate on revolving loans that consists of a variable-rate of interest and an applicable margin. While we have drawn from this credit facility in the past, we have no borrowings outstanding as of December 30, 2023. If we borrow from the credit facility in the future, we will again be exposed to interest rate fluctuations.

LATTICE SEMICONDUCTOR CORPORATION

CONSOLIDATED STATEMENTS OF OPERATIONS

The accompanying notes are an integral part of these Consolidated Financial Statements.

LATTICE SEMICONDUCTOR CORPORATION

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

The accompanying notes are an integral part of these Consolidated Financial Statements.

LATTICE SEMICONDUCTOR CORPORATION

CONSOLIDATED BALANCE SHEETS